I'm an Engineer. This ChatGPT Test Scared Me.
เผยแพร่ 1 พ.ย. 2569 · 12:19
ไลก์: 29Kความคิดเห็น: 4K+24 ชม.: +50Kยอดดูเฉลี่ย/ชม.: 7K
ผลงานเป็นตัวเลข
ตัวเลข ณ 17 พ.ย. 2569 11:00 UTC
I'm an Engineer. This ChatGPT Test Scared Me. ของ Michael Lydick มียอดดู 3M ครั้ง หลังเผยแพร่เมื่อ 1 พฤศจิกายน 2569 ไป 16 วัน
ตอนนี้มียอดดู 7K ครั้งต่อชั่วโมง
ติดชาร์ตมาแรงของ YouTube ใน 6 ประเทศ อันดับดีที่สุด #19 ใน นิวซีแลนด์
วันที่ดีที่สุดจนถึงตอนนี้คือ 10 พ.ย. ด้วยยอดดู 2M ครั้ง และคนดูมากที่สุดราว 19 UTC
| ยอดดู | 3M | 2,650,562 |
|---|---|---|
| ยอดดูใน 24 ชั่วโมงล่าสุด | +50K | +50,443 |
| ยอดดูต่อชั่วโมงตอนนี้ | 7K | 6,914 |
| กี่เท่าของปกติของช่อง | 1,506× | |
| วันที่ดีที่สุด | 10 พ.ย. · 2M | 2,245,404 |
| ชั่วโมงที่คนดูมากที่สุด | 19 UTC | |
| ประเทศที่ติดชาร์ต | 6 | |
| อันดับดีที่สุด | #19 · นิวซีแลนด์ | |
| ถูกใจ | 29K | 29,431 |
| ความคิดเห็น | 4K | 3,553 |
| เผยแพร่ | 1 พฤศจิกายน 2569 | |
| ความยาว | 12:19 | |
| หมวดหมู่ | Howto & Style | |
| ช่อง | Michael Lydick | |
| ผู้ติดตามของช่อง | 31K |
ยอดดู
3M
+50K · 24 h
ยอดดู/ชม. ตอนนี้
7K
เท่าของปกติ
1,506×
ยังมีข้อมูลไม่พอ
ยอดดูต่อวัน
2M
วันที่ดีที่สุด 10 พ.ย.
มาแรงใน
6
ดีที่สุด #19 ใน นิวซีแลนด์
ช่วงเวลาที่ถูกดู
19
ชั่วโมงที่คนดูมากที่สุด ตามเวลาคุณ
ติดชาร์ตที่ไหน6
- #19นิวซีแลนด์3 พ.ย.
- #27สวีเดน3 พ.ย.
- #37ออสเตรเลีย3 พ.ย.
- #39นอร์เวย์3 พ.ย.
- #46เดนมาร์ก8 พ.ย.
- #46เนเธอร์แลนด์3 พ.ย.
จากบันทึกของ YouTube
ข้อมูลของวิดีโอตามที่ YouTube API ส่งกลับมา
- เผยแพร่
- 1 พ.ย. 2569 16:00
- ความยาว
- 12:19
- หมวดหมู่
- Howto & Style
- ภาษาของเสียง
- อังกฤษ (en-US)
- ภาษาของชื่อเรื่อง
- อังกฤษ (en-US)
- คำบรรยาย
- ไม่ใช่
- ความละเอียด
- HD
- รูปแบบ
- 2D
- ใบอนุญาต
- Standard YouTube
- เนื้อหาที่มีลิขสิทธิ์
- ไม่ใช่
- ฝังได้
- ใช่
- สร้างมาเพื่อเด็ก
- ไม่ใช่
- จำกัดอายุ
- ไม่ใช่
- โปรโมตแบบจ่ายเงิน
- ไม่ใช่
- สถิติสาธารณะ
- ใช่
หัวข้อ
- Lifestyle
- Technology
ชื่อเรื่องและคำอธิบายใน 1 ภาษา
- อังกฤษ
คำอธิบาย
I gave ChatGPT photos of a broken part, a few measurements, and some plain-English instructions. After a handful of revisions, I had a resin-printed replacement that was nearly identical to the original. I never opened Fusion 360 to design it. Guys, I'm a mechanical engineer. I'm excited about this. I'm also kind of scared to death. Hey, it's me, Michael. This started with an Olight flashlight and a messy 3D scan. I wanted a clean model I could actually build something around. ChatGPT repaired the mesh, then rebuilt it as an editable solid I could open in Fusion 360. That alone blew my mind. Then I wondered: could I skip the CAD program altogether? So I grabbed a broken cargo net clip, uploaded photos, supplied a few measurements, and asked for a printable STL. In this video, I'll show you the first attempt, the things it got wrong, and how we worked through the shape and dimensions until I had the replacement in my hand. There were revisions. There were measurements. There were test prints. But I wasn't sitting there drawing the part in CAD. I was telling ChatGPT what needed to change. If you're an engineer, a CAD designer, or someone with a 3D printer and a broken part you've been meaning to replace, you're going to want to see this. Tell me in the comments: what part would you try this with? And if you work in engineering, does this excite you, scare you, or both? Give the video a like, share it with a friend who uses CAD, and subscribe so you don't miss the next project. Next up, I want to connect ChatGPT directly to Fusion 360 and explore multipart models with constraints and movement. With the scanners and army of 3D printers I've got here, this could get interesting. CHAPTERS 0:00 Engineers, this is your heads-up 0:22 The flashlight scan that started it 1:11 Repairing the mesh with ChatGPT 2:04 From scan triangles to an editable CAD solid 3:04 Could I skip CAD altogether? 3:58 Recreating a broken clip from photos 5:01 ChatGPT's first model—even the crack 5:40 Comparing the first print to the original 6:05 Fixing the shape with marked-up photos 6:57 Version three: getting closer 7:28 Correcting dimensions with grid paper 8:29 Refining the taper and printing the replacement 9:40 The final comparison—and why it matters 10:33 What's next: ChatGPT connected to Fusion 360 11:12 Why engineers should pay attention Take care, guys, and thanks again. #ChatGPT #3DPrinting #ReverseEngineering #Fusion360 #MechanicalEngineeringแสดงทั้งหมด
I gave ChatGPT photos of a broken part, a few measurements, and some plain-English instructions. After a handful of revisions, I had a resin-printed replacement that was nearly identical to the original. I never opened Fusion 360 to design it. Guys, I'm a mechanical engineer. I'm excited about this. I'm also kind of scared to death. Hey, it's me, Michael. This started with an Olight flashlight and a messy 3D scan. I wanted a clean model I could actually build something around. ChatGPT repaired the mesh, then rebuilt it as an editable solid I could open in Fusion 360. That alone blew my mind. Then I wondered: could I skip the CAD program altogether? So I grabbed a broken cargo net clip, uploaded photos, supplied a few measurements, and asked for a printable STL. In this video, I'll show you the first attempt, the things it got wrong, and how we worked through the shape and dimensions until I had the replacement in my hand. There were revisions. There were measurements. There were test prints. But I wasn't sitting there drawing the part in CAD. I was telling ChatGPT what needed to change. If you're an engineer, a CAD designer, or someone with a 3D printer and a broken part you've been meaning to replace, you're going to want to see this. Tell me in the comments: what part would you try this with? And if you work in engineering, does this excite you, scare you, or both? Give the video a like, share it with a friend who uses CAD, and subscribe so you don't miss the next project. Next up, I want to connect ChatGPT directly to Fusion 360 and explore multipart models with constraints and movement. With the scanners and army of 3D printers I've got here, this could get interesting. CHAPTERS 0:00 Engineers, this is your heads-up 0:22 The flashlight scan that started it 1:11 Repairing the mesh with ChatGPT 2:04 From scan triangles to an editable CAD solid 3:04 Could I skip CAD altogether? 3:58 Recreating a broken clip from photos 5:01 ChatGPT's first model—even the crack 5:40 Comparing the first print to the original 6:05 Fixing the shape with marked-up photos 6:57 Version three: getting closer 7:28 Correcting dimensions with grid paper 8:29 Refining the taper and printing the replacement 9:40 The final comparison—and why it matters 10:33 What's next: ChatGPT connected to Fusion 360 11:12 Why engineers should pay attention Take care, guys, and thanks again. #ChatGPT #3DPrinting #ReverseEngineering #Fusion360 #MechanicalEngineering
◆ คำนวณโดย viralshooter · ตัวเลขอื่นทั้งหมดมาจาก YouTube API