I'm an Engineer. This ChatGPT Test Scared Me.
Đăng ngày 1 thg 11, 2026 · 12:19
Lượt thích: 29 NBình luận: 4 N+24 giờ: +50 NLượt xem TB/giờ: 7 N
Hiệu suất bằng con số
Số liệu tính đến 11:00 17 thg 11, 2026 UTC.
I'm an Engineer. This ChatGPT Test Scared Me. của Michael Lydick có 3 Tr lượt xem, 16 ngày sau khi đăng vào 1 tháng 11, 2026.
Hiện có 7 N lượt xem mỗi giờ.
Video có mặt trên bảng xu hướng YouTube ở 6 quốc gia, cao nhất #19 tại New Zealand.
Ngày tốt nhất đến nay là 10 thg 11 với 2 Tr lượt xem; được xem nhiều nhất khoảng 19 giờ UTC.
| Lượt xem | 3 Tr | 2.650.562 |
|---|---|---|
| Lượt xem trong 24 giờ qua | +50 N | +50.443 |
| Lượt xem mỗi giờ hiện tại | 7 N | 6.914 |
| Gấp mấy lần thường lệ của kênh | 1.506× | |
| Ngày tốt nhất | 10 thg 11 · 2 Tr | 2.245.404 |
| Giờ đông nhất | 19 giờ UTC | |
| Quốc gia có xu hướng | 6 | |
| Thứ hạng cao nhất | #19 · New Zealand | |
| Lượt thích | 29 N | 29.431 |
| Bình luận | 4 N | 3.553 |
| Ngày đăng | 1 tháng 11, 2026 | |
| Thời lượng | 12:19 | |
| Danh mục | Howto & Style | |
| Kênh | Michael Lydick | |
| Người đăng ký kênh | 31 N |
Lượt xem
3 Tr
+50 N · 24 h
Lượt xem/giờ hiện tại
7 N
× mức thường
1.506×
Chưa đủ dữ liệu.
Lượt xem mỗi ngày
2 Tr
ngày cao nhất, 10 thg 11
Thịnh hành ở
6
cao nhất #19 tại New Zealand
Khi nào được xem
19 giờ
giờ đông nhất, theo giờ của bạn
Thứ hạng6
- #19New Zealand3 thg 11
- #27Thụy Điển3 thg 11
- #37Úc3 thg 11
- #39Na Uy3 thg 11
- #46Đan Mạch8 thg 11
- #46Hà Lan3 thg 11
Từ hồ sơ YouTube
Các trường của video đúng như YouTube API trả về.
- Đã đăng
- 16:00 1 thg 11, 2026
- Thời lượng
- 12:19
- Danh mục
- Howto & Style
- Ngôn ngữ âm thanh
- Tiếng Anh (en-US)
- Ngôn ngữ tiêu đề
- Tiếng Anh (en-US)
- Phụ đề
- Không
- Độ phân giải
- HD
- Định dạng
- 2D
- Giấy phép
- Standard YouTube
- Nội dung có cấp phép
- Không
- Có thể nhúng
- Có
- Dành cho trẻ em
- Không
- Giới hạn độ tuổi
- Không
- Quảng bá trả phí
- Không
- Thống kê công khai
- Có
Chủ đề
- Lifestyle
- Technology
Tiêu đề và mô tả bằng 1 ngôn ngữ
- Tiếng Anh
Mô tả
I gave ChatGPT photos of a broken part, a few measurements, and some plain-English instructions. After a handful of revisions, I had a resin-printed replacement that was nearly identical to the original. I never opened Fusion 360 to design it. Guys, I'm a mechanical engineer. I'm excited about this. I'm also kind of scared to death. Hey, it's me, Michael. This started with an Olight flashlight and a messy 3D scan. I wanted a clean model I could actually build something around. ChatGPT repaired the mesh, then rebuilt it as an editable solid I could open in Fusion 360. That alone blew my mind. Then I wondered: could I skip the CAD program altogether? So I grabbed a broken cargo net clip, uploaded photos, supplied a few measurements, and asked for a printable STL. In this video, I'll show you the first attempt, the things it got wrong, and how we worked through the shape and dimensions until I had the replacement in my hand. There were revisions. There were measurements. There were test prints. But I wasn't sitting there drawing the part in CAD. I was telling ChatGPT what needed to change. If you're an engineer, a CAD designer, or someone with a 3D printer and a broken part you've been meaning to replace, you're going to want to see this. Tell me in the comments: what part would you try this with? And if you work in engineering, does this excite you, scare you, or both? Give the video a like, share it with a friend who uses CAD, and subscribe so you don't miss the next project. Next up, I want to connect ChatGPT directly to Fusion 360 and explore multipart models with constraints and movement. With the scanners and army of 3D printers I've got here, this could get interesting. CHAPTERS 0:00 Engineers, this is your heads-up 0:22 The flashlight scan that started it 1:11 Repairing the mesh with ChatGPT 2:04 From scan triangles to an editable CAD solid 3:04 Could I skip CAD altogether? 3:58 Recreating a broken clip from photos 5:01 ChatGPT's first model—even the crack 5:40 Comparing the first print to the original 6:05 Fixing the shape with marked-up photos 6:57 Version three: getting closer 7:28 Correcting dimensions with grid paper 8:29 Refining the taper and printing the replacement 9:40 The final comparison—and why it matters 10:33 What's next: ChatGPT connected to Fusion 360 11:12 Why engineers should pay attention Take care, guys, and thanks again. #ChatGPT #3DPrinting #ReverseEngineering #Fusion360 #MechanicalEngineeringHiện tất cả
I gave ChatGPT photos of a broken part, a few measurements, and some plain-English instructions. After a handful of revisions, I had a resin-printed replacement that was nearly identical to the original. I never opened Fusion 360 to design it. Guys, I'm a mechanical engineer. I'm excited about this. I'm also kind of scared to death. Hey, it's me, Michael. This started with an Olight flashlight and a messy 3D scan. I wanted a clean model I could actually build something around. ChatGPT repaired the mesh, then rebuilt it as an editable solid I could open in Fusion 360. That alone blew my mind. Then I wondered: could I skip the CAD program altogether? So I grabbed a broken cargo net clip, uploaded photos, supplied a few measurements, and asked for a printable STL. In this video, I'll show you the first attempt, the things it got wrong, and how we worked through the shape and dimensions until I had the replacement in my hand. There were revisions. There were measurements. There were test prints. But I wasn't sitting there drawing the part in CAD. I was telling ChatGPT what needed to change. If you're an engineer, a CAD designer, or someone with a 3D printer and a broken part you've been meaning to replace, you're going to want to see this. Tell me in the comments: what part would you try this with? And if you work in engineering, does this excite you, scare you, or both? Give the video a like, share it with a friend who uses CAD, and subscribe so you don't miss the next project. Next up, I want to connect ChatGPT directly to Fusion 360 and explore multipart models with constraints and movement. With the scanners and army of 3D printers I've got here, this could get interesting. CHAPTERS 0:00 Engineers, this is your heads-up 0:22 The flashlight scan that started it 1:11 Repairing the mesh with ChatGPT 2:04 From scan triangles to an editable CAD solid 3:04 Could I skip CAD altogether? 3:58 Recreating a broken clip from photos 5:01 ChatGPT's first model—even the crack 5:40 Comparing the first print to the original 6:05 Fixing the shape with marked-up photos 6:57 Version three: getting closer 7:28 Correcting dimensions with grid paper 8:29 Refining the taper and printing the replacement 9:40 The final comparison—and why it matters 10:33 What's next: ChatGPT connected to Fusion 360 11:12 Why engineers should pay attention Take care, guys, and thanks again. #ChatGPT #3DPrinting #ReverseEngineering #Fusion360 #MechanicalEngineering
◆ Do viralshooter tính · mọi số liệu khác từ YouTube API